• EMAIL SUPPORT

    [email protected]

  • HUNT LINE

    09-772222900

  • WORKING HOURS

    Mon - Fri 8:30 - 5:30/ Sat 8:30-12:30

    Close Public Holidays

11

Apr

2021

How to Create Your Own Dog Mask – The Basics

By, Hr Webadmin Uncategorized Comments: no comments

In this article we’re going to look at how to make your own dog mask. We’ll cover the basics and then go on to look at a number of the more advanced tips and tricks which you can use.

If you have a dog that likes to bark, and particularly if your dog loves to play in the backyard and other areas of the house, you need to get them some special dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the first part of the setup that will look a little scary at first, but it is really very simple. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t simply cut a rectangular shape out of the cardboard, so you’ll have to cut around the edge of the mask so that you get something which looks like a cone. The most important thing here is to be realistic with what type of paper plate which you’re using.

Then you will have to wrap the cardboard around the edges of the paper plate, making certain that there is a good seal between the two pieces so you can make certain that nothing will leak when you place the mask on. Be sure that the edges are cut so that the edges are not sharp, as this may damage the edges of the mask.

Glue it on! The next step involves using some paint. You ought to spray the paint over the cardboard, making certain it runs smoothly and evenly across the whole mask. You’ll want to start with one side of the mask first, so you can work your way round it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it’s best that you leave about one-third of an inch of paint on the edges so that it https://ejtallmanteam.com/finding-the-best-cheap-dog-food/ runs over the cardboard.

Don’t worry too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it will leave you with a wonderful finished mask to show off to everyone! It’s also a good idea to wash away any excess paint after you are done, so you don’t end up with smudges or smears on your dog.

Then it’s time to paste the mask on your dog’s head. First you will need to be certain that you have a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it’s secure, then you can begin to glue the mask on the dog’s face. Take the piece of cardboard that is used for the base of the mask and fold it over. Make sure that it’s quite powerful and then use your hands to ensure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds until you’ve got the mask snugged securely onto the face of your dog. Do not make the folds too large or else it might look messy. Once you’ve done this, you can then take out the mask and attach the cardboard ears. And attach the other part of the mask on the dog. Make certain the ears are flat and make sure that it’s not too short or long as this can cause some issues with the mask slipping off the dog’s face.

If you’re using a dog mask as your dog protection, you’ll need to do some sanding to make sure that it is secure on your dog. You can do this by sanding off any excess paper which might have been removed from your mask.

Leave a Reply

Your email address will not be published. Required fields are marked *


latest Post
MGL OMS Training

20 Aug 2019

Privacy Policy

11 Dec 2018

Branches Post

19 Apr 2018

Sale Executive

12 Apr 2018

Profile

Apr 2018

Express Mails

Apr 2018